UTV Parts

Fortin Can-Am Rear Hub Kit

Fortin Racing used over 40 years of drivetrain experience to design their Can-Am X3 rear brake hub kit. This is a complete redesign for the ultimate in strength and reliability of the hubs, upright, bearings, CV’s, axles and brakes. The design parameters were to build a brake hub and drivetrain system that would handle larger diameter tires and increased loads experienced during competition endurance off-road racing events.

CA Prop 65 Warning 







Aerospace quality 7075 billet aluminum uprights

Large  4.3” tapered  roller wheel bearings ..Much stronger than the stock units

Hubs are made from lightweight  6061-T6 billet aluminum for less sprung weight

Original 12mm 4-bolt wheel patter, requires 15" wheels

Larger 11” rotors for improved stopping power over stock units

4-piston radial mount calipers sized to match the stock master cylinder

Stock metric brake lines bolt directly to the Fortin calipers

Fortin developed their all new non-plunging high angle CV joint from a combination of 300M and aerospace alloys

High angle CV boots are attached to removable flanges

Kit is supplied with inner stub axles that are through bolted to the inner differential


Sku List: